Detailed Product Description

The rock wool production line /Mineral Wool Production Line mainly uses basalt, limestone or dolomite as raw materials. To control the environmental pollution, natural gas is used as the fuel of tank furnace.

The high-temperature molten substance flown into the spinning system fiberise under the joint action of spinning force of the spinning wheels and high-speed air stream of the blow-off system.

Fibers settle uniform on the fast moving forming conveyor under the sucking action of the under pressure in the collecting chamber and form a thin layer of primary felt. A facing unit and a semi-automatic rolling set can be installed between collecting conveyor and curing oven. After unformed felt enters the curing oven, the felt layer is pressed by the lower and upper mesh plates in the oven.

The felt plates coming from the curing oven can be processed into the required products through cooling zone, edge trimming unit, facing unit, thickness band saw, stitching unit, length measuring unit, cross cutting machine, guillotine, automatic rolling machine, packing machine and slab diverting and stacking.

Production line technology parameters:

1. Output: 5,000MT/year, 10,000MT/year, 20,000MT/year

2. Textile fiber diameter: 5-8um

3. Slag globule content: 6-8%

4. Raw material coefficient of acidity: 1.2-2.6

5. Board product specifications:

   a. Board width: 1,000mm

   b. Board length: 1,000mm (adjustable)

   c. Felt length: 1,000mm-10,000mm (adjustable)

   d. Thickness: 30-200mm

   e. Density: 40-200kg/m³

6. Product application temperature: 600^oC